Light, strong with extra tall teeth, the Wolf Tooth Aluminum Single Speed Cog is a lightweight option for single speed cogs that's offered in a variety of sizes. - Wide 4.5mm base won't dig into your freehub - Made of 7075 Aluminum Alloy for durability and lightness - Made in the USA
- Extended range aluminum cog for those wanting 1x10 with a full range of gears - Only fits Shimano XT/XTR 11-36t (M771/M980) or SRAM X5/X7/X9/X0 11-36t 10sp cassettes (not compatible with 2011 and older SRAM derailleurs) - Requires removal of the 17T or 15T cog and spacer from existing cassette - Longer B-screw (sold separately) only needed for about 50% of Shimano derailleurs - May require a longer 10sp chain. Very tight fit on Stans 330 rear hub splines - Designed and manufactured in the USA from 7075-T6 aluminum alloy
Pair this cog with your Shimano-compatible rear hub, spacers and a lockring (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. Machined from heat-treated chromoly and then chrome plated, these seriously tough cogs are strong, shiny and they come in sizes from 13T to 22T so you can pick the perfect gear.
$30.00 - $35.00
Machined from heat-treated, chrome-plated chromoly, these seriously tough cogs will hold up to massive track sprints and crazy skid-stops. Surly's Track Cogs are strong, shiny and they come in two widths and sizes from 13T to 22T so you can select the perfect gear.
$19.39 - $29.99
• Easy-on, easy-off • Available in two chain widths and two colors • Available in six teeth sizes
$5.00 - $6.59
- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability
$26.99 - $29.99
Shimano Altus M2000 Series 9-speed cassette. Combinations: - 11 – 32T: 11-13-15-17-19-21-24-28-32T (bo) - 11 – 34T: 11-13-15-17-20-23-26-30-34T (bn) - 11 – 36T: 11-13-15-17-20-23-26-30-36T (bw)
$42.99 - $51.99
Shimano Deore M6000 CS-HG500-10 10-speed cassette. Combinations: - 11 – 25T: 11-12-13-14-15-17-19-21-23-25T - 12 – 28T: 12-13-14-15-17-19-21-23-25-28T - 11 – 32T: 11-12-14-16-18-20-22-25-28-32T - 11 – 34T: 11-13-15-17-19-21-23-26-30-34T
Shimano Deore M6000 Series 10-speed cassette. - Cogs: 11-13-15-17-19-21-24-28-32-36T
$117.99 - $118.00
• Steel construction on all but the largest aluminum gear • Nickel-plated finish for corrosion and wear resistance • Dyna-sys 11-speed cassette with "Rhythm step" gearing for closer gear ratios and smoother shifting performance • Fits Dyna-sys 11-speed and current Shimano 9/10-Speed MTB hubs • The largest cog (40t) is positioned inboard and above the drive-side flange • Hubs with tall drive-side flanges may not be compatible due to spoke interference
$17.99 - $24.99
Shimano Tourney CS-HG200-7 7-speed cassette Combinations: - 12 – 28T: 12-14-16-18-21-24-28T (bm) - 12 – 32T: 12-14-16-18-21-26-32T (bp)
$86.99 - $99.99
- High-performance gear combinations provide superior rider choice - Hub body to fit a variety of bikes from MTB to road - Model Number: CS-HG800-11 - Series: Shimano - Average Weight: 335 grams
$65.00 - $99.99
SRAM's PG-1130 11-Speed Cassette is constructed of heat-treated steel cogs and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick, positive gear changes. This excellent cassette also sports an aluminum spider construction for a maximum stiffness-to-weight ratio, a durable steel lockring, and comes in three wide ranges to suit your riding style.
Ride anywhere with the wide-range PG-1230, 11- to 50-tooth Eagle cassette. The NX cassette gives riders every bit of the climbing range that the Eagle ecosystem affords with a simple upgrade to splined-drive body wheels. The PG-1230 is the only Eagle cassette designed to be durable enough to withstand the increased demands of E-MTB applications and a perfect solution to heavy-duty use and abuse. Eagle technology provides an expanded, optimum gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents. Eagle is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. SRAM guarantees this performance when Eagle drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact. - Compatible with a splined driver body - Wide 11-50T gear range—a perfect fit for any ride - Optimized gear steps across entire range - 11-50T: 11, 13, 15, 17, 19, 22, 25, 28, 32, 36, 42, 50
No mixed messaging or compromises here. The GX DH cassette was built with only one purpose in mind—exploiting gravity to its fullest lap after lap. This downhill-optimized 7-speed cassette provides gear steps that give each shift more purpose, and its compact design allows more spoke clearance. It’s a full-on, dedicated SRAM 1x cassette for gravity that lets you keep some money for a lift ticket. GX DH—Get Some. - The PG-720 cassette is an integral part of the SRAM 1x DH drivetrain system - This is the most affordable full-featured, dedicated 1x DH cassette in the industry - Fewer cogs allow for a faster transition from starting cog to highest cog - More rear wheel clearance around spokes - Fully compatible with the SRAM X01 DH drivetrain - Splined driver body compatible - Weight: 224 grams - Gear-Ratio:11 – 25T - Speeds: 7 - Recommended Group: GX DH
$31.99 - $39.99
When it's time to replace your 9-speed cassette, check out SRAM's PG-950 cassette. It delivers solid shifting and durability ride in and ride out for your 9-speed rig.
Once again, SRAM pushes the envelope with their Powerdome X XG-1090 10-Speed Cassette. Light, stiff, quick, and quiet thanks to the ultra-strong, hollow, one-piece design and StealthRing elastomers, this cassette is worthy of even the nicest road machines. SRAM has added elastomer rings between every cog to provide a 'bed' where the plates of the chain interface with the cog. These elastomer StealthRings make for whisper-quiet operation. It's light, too, with the small 11T cog separate, and the remaining 9 cogs milled from a solid block of tool-grade steel pressed onto a single aluminium cog (the largest one). And, to REDuce even more weight, excess material in the space between each cog is milled away.
Simplify your drivetrain with SRAM's XG-1195 11-Speed X-Glide Cassette. It has a monstrous 10-42 tooth spread that gives SRAM's 1x11 drivetrain pretty much the same gearing as 2- and 3-ring setups, with less weight, parts, and complexity. Yes, you can still spin up your hardest climbs. A key thing to note, is that even with the huge range, there are no huge jumps or dips in the gearing, so your cadence and pedaling stay consistent as you move up and down the entire cassette. The wide-open design makes it incredibly lightweight and aids in mud clearance, giving you cleaner shifting and longer component life. The XG-1195 is for use with SRAM's X01 or XX1 drivetrain.
The workhorse of X-Range gearing, the SRAM RED XG-1290 cassette progresses fluidly and quickly through a wider range of gears. It's specifically designed for wireless electronic shifting and the one-piece design offers you the best in weight savings. - Updated design for smoother and faster shifting - More gradual gear progression between cogs—at least five one-tooth jumps—while still offering a wider range - 10-tooth start helps provide a wider gearing range - Designed to work with an XDR driver body - One-piece machined steel X-Dome design for weight savings - All Zipp wheels starting from 2012 are XDR ready - Version: D1 - 10-26T: 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 23, 26 - 10-28T: 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 24, 28 - 10-33T: 10, 11, 12, 13, 14, 15, 17, 19, 21, 24, 28, 33
$29.79 - $31.19
A range of sturdy, affordable cogs is an essential part of a fixie rider's quiver. Origin-8's Track Cog is available in a variety of sizes and is chrome plated to resist rust and increase longevity. Now you can easily tailor your ride for the terrain. And you can choose between 1/8 and 3/32-inch chain widths.
Dimension cassettes feature Shimano/SRAM compatible spacing, precise fitment for crisp shifting, and easy installation with standard tools. They're a perfect replacement for worn out cogs. Constructed of steel cogs and lock ring. Cassette Cogs: - 11 – 28T: 11-13-15-18-21-24-28 - 12 – 28T: 12-14-16-18-21-24-28 - 12 – 32T: 12-13-15-18-21-24-32
$6.99 - $7.99
Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility. - Steel with chrome finish - Cogs are splined for Shimano BMX and singlespeed hub compatibility - Compatible with 1/2-inch and 1/8-inch chains
Steel single sprockets with galvanized finish. - Lockring included - Cassette Body Type: Campagnolo 9 Speed - Drivetrain Speeds: 9 - Weight: 212 grams (12-23)
Page 1 of 1